SPECIFICATIONS：
| Model | Unit | ESG-818M | |
| Table Size | L x W | mm | 203x460 |
| Max.grinding length | Longitudinal | mm | 480 |
| Max.grinding width | Crosswise | mm | 228 |
| Table loading | Max. loading | KGS | 202 |
| Max. distance from table surface to spindle centerline | mm | 460 | |
| Stadard magnetic chuck size | mm | 200x450 | |
| Longitudinal movement of table | Max. travel, hydraulic | mm | 480 |
| Max. travel, manual | mm | 510 | |
| Max.travel,infinitelyvariable | m/min | 60HZ, 5-25m/min 50HZ, 5-20m/min |
|
| Cross transverse travel | Auto transverse increment | mm | 0.5-10 |
| Auto. Constant Feeding Speed | mm/min | 20-320 | |
| Max. auto transverse travel | mm | 235 | |
| Max. manual transverse travel | mm | 250 | |
| Handwheel per Revolution | mm | 5 | |
| Handwheel per Graduation | mm | 0.02 | |
| Wheelhead verticalin feed | Automaticinfeed | mm | ASD: 0.001-0.4 ASDII: 0.001-0.1 |
| Step feed (jog) | mm | - | |
| Rapid travel, Approx | mm/min | - | |
| Slow travel, Approx | mm/min | - | |
| Handwheel revolution | mm | 1mm ASDII: Min. display value: 0.01mm (no elevating handwheel) | |
| Handwheel graduation | mm | 0.005mm ASDII: Min. display value: 0.01mm (no elevating handwheel) | |
| Grinding spidle drive | Speed | RPM | 60HZ, 3450 R.P.M. 50HZ, 2850 R.P.M. |
| Power rating | HP | 2.0 | |
| Standard grinding wheel | Diameter | mm | 203 |
| Width | mm | Standard 12.7 Max 19 |
|
| Bore | mm | 31.75 | |
| Hydraulic motor | Power rating | HP | 1 |
| Crossfeed motor | Power rating | W | 40W ASDII: 500W |
| Elevating motor | Power rating | W | - |
| Floor space | Total space required | mm | 2992x2468x1733 |
| Weights | Net weight, Approx. | KGS | 1170 |
| Gross weight, Approx. | KGS | 1340 | |
| Coolant system | Power rating | HP | 1/8 |
| Rated power, Approx | Power rating | HP | 3.0 ASDII: 4.0 |
| Packing dimensions | LxWxH | mm | 1550x1530x1960 |
