PRODUCTS PROFILE

> Semi-automatic

ESG-1A818~2A818

機能規格:

SPECIFICATIONS

1A: Longitudinal Hydraulic. 

2A: Longitudinal Hydraulic And Crossfeed Motorized. 

3A: Longitudinal Hydraulic, Crossfeed Motorized And Rapid Up/Down Motorized. 

ASD: Fully Automatic In 3 Axis (X. Y. Z.) With Stepping Motor For Downfeed, And AC Motor For Rapid Up/Down.

MODEL

ESG-1A818~2A818

Table Size

203x460mm(8x18")

Max.grinding length

Longitudinal

480mm(19")

Max.grinding width

Crosswise

228mm(9")

Max. distance from table surface to spindle centerline

460mm(18")

Stadard magnetic chuck size

200x450mm(8x18")

Longitudinal movement of table

Max. travel, hydraulic

480mm(19")

Max. travel, manual

510mm(20")

Max. travel,infinitely variable

60HZ,5-25m/min,50HZ,5-20m/min

Cross transverse travel

Auto transverse increment

1-10mm(0.04"-0.4")

Max. auto transverse travel

235mm(9 1/4")

Max. manual transverse travel

250mm(9 3/4")

Handwheel per revolution

5mm(0.2")

Handwheel per graduation

0.02mm(0.0005")

Sheelhead vertical infeed

Automatic infeed

 

Step feed (jog)

 

Rapid travel, Approx

 

Slow travel, Approx

 

Handwheel revolution

1mm(0.05")

Handwheel graduation

0.005mm(0.0001")

Grinding spidle drive

Speed

60HZ,3450 R.P.M.  /  50HZ,2850 R.P.M.

Power rating

2.0HP

Standard grinding wheel

Diameter

203MM(8")

Width

12.7mm (1/2”), MAX. 19mm (3/4”)

Bore

31.75mm(1 1/4")

Hydraulic motor

Power rating

1HPx6P

Crossfeed motor

Power rating

40Wx6P

Elevating motor

Power rating

40Wx6P

Floor space

Total space required

1810x1285x1680mm(71"x50 1/2"x66")

Weights

Net weight, Approx.

1170KGS(2574LBS)

Gross weight, Approx.

1340KGS(2948LBS)

Rated power, Approx

 

3.0HP

Packing dimensions

L x W x H

1890x1540x1930mm(75"x61"x76")

NOTE:
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown above are just for reference.

 

 

GENERAL FEATURES

1. High Precision Cartridge Wheel Spindle 

High precision cartridge type spindle is supported by two preloaded precision angular contact ball bearings & one NN type Roller bearing and driven by V3 class motor that allow high accurate grinding performance. (618/818 series are driven by 2.0HP motor.)

 

2. High Anti-Wear Guide Ways 

The saddle rests on precision hand-scraped double V ways, and the table rests on precision hand-scraped V and flat ways which coated with "TURCITE-B". These guide ways are equipped with auto lubrication to resist wear of guide ways, plus lasting accuracy and damping. 

 

3. High Rigid Casting Construction 

Machines are casted with high grade casting iron with heavy walls and reinforced ribs to provide excellent rigidity and damping.

 

4. Enlarged Column And Base 

Enlarged column and base create high stability and rigidity. The height of column is increased up to 18" (460mm) from table surface to the center line of spindle.

 

5. Auto Lube System 

Automatic lubrication system is applied as standard to ensure sufficient lubrication at lead-screws and guide-ways for more longevity. 

 

6. Longitudinal & Cross Drive 

For all models, except 618 & 818 handfeed, the longitudinal movement is driven by hydraulic system; for 2A, 3A, ASD series, the cross movement is driven by motor for more accurate increment feeding.

 

 

 

 

 

Spindle For 618, 818 Series

Saddle and table

Positioning system(for 614)

Auto lubrcation system

Cross slice way

Table Hydraulic Travel Adjusting l

 

 

OPTIONAL ACCESSORES

 

Permanent Magnetic Chuck

 

Inclinable Permanent Magnetic Chuck

 

Electro Magnetic Chuck

 

Chuck Control With Demagnetizer

 

Coolant System

Coolant System With Magnetic Separator

Dust Collector

Coolant And Dust Unit

Coolant System With Manual Paper Feeding Device

Auto Paper Feeding device With Magnetic Separatorr

Splash Guard

Manual Parallel Dressing Attachment

Chuck Control With Demagnetizer

Digital Readout

Spare Wheel Flange

Work Licht (Quartz)

Balancing Stand (Double Line)

Roller Type Balancing Stand

Swivel Wheel Guard

Precision Vice

Frequency Changer

Concave Convex Forming Dresser

Micro Crossfeed For 618/818

 

 

 

 

STANDARD ACCESSORIES

1. Tool box with tools

6. Wheel flange

2. Wheel extract screw & nut

7. Touch-up paint

3. Balancing arbor

8. Auto lubrication system

4. Levelling screw with blocks

9. Diamond dresser

5. Grinding Wheel

10. Crossfed Ballscrew