PRODUCTS PROFILE

> Semi-automatic

ESG-3A1640

機能規格:

SPECIFICATIONS

1A: Longitudinal Hydraulic. 

2A: Longitudinal Hydraulic And Crossfeed Motorized. 

3A: Longitudinal Hydraulic, Crossfeed Motorized And Rapid Up/Down Motorized. 

ASD: Fully Automatic In 3 Axis (X. Y. Z.) With Stepping Motor For Downfeed, And AC Motor For Rapid Up/Down.

MODEL

ESG-3A1640

Table Size

406x1020mm(16x40")

Max.grinding length

Longitudinal

1020mm(40")

Max.grinding width

Crosswise

410mm(16")

Max. distance from table surface to spindle centerline

Standard column:630mm(24 3/4"); Optional high column:720mm(28 5/16")

Stadard magnetic chuck size

400x800mm(15 11/16x31 1/2")

Longitudinal movement of table

Max. travel, hydraulic

1060mm(41 11/16")

Max. travel, manual

1100mm(43 1/4")

Max. travel,infinitely variable

60HZ,5-25m/min,50HZ,5-20m/min

Cross transverse travel

Auto transverse increment

1~25mm(0.04"-1")

Max. auto transverse travel

430mm(17")

Max. manual transverse travel

460mm(18")

Handwheel per revolution

5mm(0.2")

Handwheel per graduation

0.02mm(0.001")

Sheelhead vertical infeed

Automatic infeed

manual rapid up/down

Step feed (jog)

0.001mm(0.00005")

Rapid travel, Approx

150mm/min

Slow travel, Approx

6mm/min

Handwheel revolution

1mm(0.05")

Handwheel graduation

0.005mm(0.0005")

Grinding spidle drive

Speed

60HZ,1750 R.P.M.; / 50HZ,1450 R.P.M.

Power rating

Standard:5HP; Optional:7 1/2HP,10HP

Standard grinding wheel

Diameter

355mm(14")

Width

50mm(2")

Bore

127mm(5")

Hydraulic motor

Power rating

3.0HPx6P

Crossfeed motor

Power rating

80Wx6P

Elevating motor

Power rating

1/4HPx6P

Floor space

Total space required

4020x2200x2050xmm(158x87x81")

Weights

Net weight, Approx.

4000KGS(8800LBS)

Gross weight, Approx.

4500KGS(9900LBS)

Rated power, Approx

 

8 1/2HP(Spindle motor:5HP)

11HP(Spindle motor:7.5HP),

Packing dimensions

L x W x H

3250x2290x2200mm(128x90x88")

NOTE:
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown above are just for reference.

 

 

GENERAL FEATURES

1.Column: 

Enlarged, honeycomb-ribbed column especially suitable for heavy duty grinding.

 

2.Construction: 

Construction of table, saddle and base is casted with high grade iron, strongly ribbed.

 

3.Spindle: 

Enlarged spindle set is supported by four preloaded precision angular contact Ball bearings for heavy duty.

 

4.Slideways: 

Vertical, cross (double vess) and longitudinal (one vee &one flat) slideways are coated with Turcite-B, provides stable movement and durable accuracy. 

 

5.Automatic Continuous Lubrication System: 

All slideways and screws are fully oiled by automatic continuous lubrication system to eliminate wears on slideways & screws. 

 

6.Cross Feed: 

Ball screw for cross travel, powered by AC motor.

 

7.Hydraulic Table: 

Table speed ranges 5-25m/min. With rack and pinion table drive for hand operation. 

 

8.Proximity Switch: 

Provide built-in-type (hidden) proximity switch, features safe and easy operation. 

 

9.Table Speed Control: 

Presettable hydraulic table speed control allows operator to pre-set speed rate, enable to get same speed rate when engaging hydraulic table every time. 

 

10.Hand Wheels: 

Zero-setting slip-ring with vernier on vertical handwheel, and vernier on crossfeed handwheel.

 

 

 

 

 

Enlarged Spindle Set For 1228, 1232, 1236, And 16 Series

Ballscrew For Crossfeed Movement

Presettable Table Speed Control For 1228, 1232, 1236, And 16 Series

Auto Lubrication System

 

 

OPTIONAL ACCESSORES

 

Electro Magnetic Chuck

 

Inclinable Permanent Magnetic Chuck

 

Swivel Wheel Guard

 

Frequency Changer

 

Coolant System With Manual Paper Feeding Device

Auto Paper Feeding Device With Magnetic Separator

Full Guarded Splash Guard (10/12/16 Series)

Electro Parallel Dressing Attachment

Screw Type Parallel Dressing Attachment

Concave Convex Forming Dresser

Work Lamp

Splash Guard

Wheel Flange

Manual Parallel Dresser

Chuck Control With Demagnetizer

Precision Vice

Punch Former

Balancing Stand (Double Line)

Roller Type Balancing Stand

Micro Crossfeed For 10/12/16 Series

Ratchet Type Electro Parallel Dresser (10/12/16 Series)

Digital Readout

Permanent Magnetic Chuck

Micro Down Feed For 10/12/16 Series

 

 

 

STANDARD ACCESSORIES

1. Tool box with tools

7. Touch-up paint

2. Wheel extract screw & nut

8. Auto lubrication system

3. Balancing arbor

9. Diamond dresser

4. Levelling screw with blocks

10. Crossfed Ballscrew

5. Grinding Wheel

11. Sweeping plate

6. Wheel flange

12.Splash Guard