EQUIPTOP HITECH CORP

> Automatic (Digital Type)

ESG-1224ASDII

Specifications

機能規格：

SPECIFICATIONS：

CONTROL PANEL
	Vertical feed powered by double motors High efficiency AC motor for rapid up / down. Stepping motor for micro downfeed positioning and slow up / down. Quick digit output feedback by encoder.
	Display for position of axis Y to show the present position of spindle. The digit display is for setting start point, rough grinding volume, start point for finish grinding(finish rginding volume), downfeed volume for finish grinding, target point, rise up point, intermittent spark-out, and spark-out.
	Cross transverse travel powered by DC servo motor. Available for step feed and continuous infeed grinding. The speed for dressing wheel is adjustable on the panel.

GRINDING PROCEDURES





1A:Longitudinal Hydraulic 2A: Longitudinal Hydraulic And Crossfeed Motorized 3A: Longitudinal Hydraulic, Crossfeed Motorized And Rapid Up/Down Motorized. ASD: Fully Automatic In 3 Axis (X. Y. Z.) With Stepping Motor For Downfeed, And AC Motor For Rapid Up/Down

MODEL		ESG-1224ASDII
Table Size		300x600mm
Max.grinding length	Longitudinal	600mm
Max.grinding width	Crosswise	330mm
Max. distance from table surface to spindle centerline		585mm
Stadard magnetic chuck size		300x600mm
Longitudinal movement of table	Max. travel, hydraulic	650mm
	Max. travel, manual	730mm
	Max. travel,infinitely variable	60HZ,5-25m/min,50HZ,5-20m/min
Cross transverse travel	Auto transverse increment	1-19mm
	Auto constant feeding speed	20-320mm/min
	Max. auto transverse travel	310mm
	Max. manual transverse travel	340mm
	Handwheel revolution	5mm
	Handwheel graduation	0.02mm
Sheelhead vertical infeed	Automatic infeed	0.001~0.05mm
	Step feed (jog)	0.001mm
	Rapid travel, Approx	150mm/min
	Slow travel, Approx	6mm/min
	Handwheel revolution	1mm
	Handwheel graduation	0.005mm
Grinding spidle drive	Speed	60HZ,1750 R.P.M. / 50HZ,1450 R.P.M.
Grinding spidle drive	Power rating	5.0HP
Standard grinding wheel	Diameter	304mm
	Width	31.75mm
	Bore	76.2mm
Hydraulic motor	Power rating	2HPx6P
Crossfeed motor	Power rating	80Wx6P
Elevating motor	Power rating	80Wx6P
Floor space	Total space required	2700x1600x1850mm
Weights	Net weight, Approx.	1990KGS
Weights	Gross weight, Approx.	2290KGS
Rated power, Approx (Standard power rating)		8 1/4HP
Packing dimensions	L x W x H	2480x2140x2100mm

NOTE:
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown above are just for reference.

General Features：

1.COLUMN:

Enlarged, honeycomb-ribbed column especially suitable for heavy duty grinding.

2.CONSTRUCTION:

Construction of table, saddle and base is casted with high grade iron, strongly ribbed.

3.SPINDLE:

Enlarged spindle set is supported by four preloaded precision angular contact Ball bearings for heavy duty.

4.SLIDEWAYS:

Vertical, cross (double vess) and longitudinal (one vee &one flat) slideways are coated with Turcite-B, provides stable movement and durable accuracy.

5.AUTOMATIC CONTINUOUS LUBRICATION SYSTEM:

All slideways and screws are fully oiled by automatic continuous lubrication system to eliminate wears on slideways & screws.

6.CROSS FEED:

Ball screw for cross travel, powered by DC servo motor.

7.PROXIMITY SWITCH:

Provide built-in-type (hidden) proximity switch, features safe and easy operation.

8.Table speed control:

Presettable hydraulic table speed control allows operator to pre-set speed rate, enable to get same speed rate when engaging hydraulic table every time.

Honeycomb-ribbed Column

Enlarged Spindle Set For 1020, 1224 Series

Ballscrew For Crossfeed Movement

Elevating Transmission System

Electrical Box (ASDII)

Easily-adjustable Hidden Proximity Switch (Long And Cross)

Table Speed Control For 1020, 1224 Series

Patent double-motor system for vertical up / down. Ac motor (rapid) / Stepping motor (slow auto downfeed)

OPTIONAL ACCESSORES：

Electro Magnetic Chuck

Inclinable Permanent Magnetic Chuck

Swivel Wheel Guard

Frequency Changer

Coolant System With Manual Paper Feeding Device

Auto Paper Feeding Device With Magnetic Separator

Coolant System

Dust Collector

Screw Type Parallel Dressing Attachment

Concave Convex Forming Dresser

Work Licht(Quartz)

Splash Guard

Spare Wheel Flange

Manual Parallel Dresser

Chuck Control With Demagnetizer

Precision Vice

Punch Former

Balancing Stand(Double Line)

Roller Type Balancing Stand

Micro Crossfeed For 618/818 Series

Ratchet Type Electro Parallel Dresser (10/12/16 Series)

Digital Readout

Permanent Magnetic Chuck

Manual Pulse Generator For ASDII Type

Coolant System With Magnetic

Coolant And Dust Unit

STANDARD ACCESSORIES：

1. Tool box with tools	6. Wheel flange
2. Wheel extract screw & nut	7. Touch-up paint
3. Balancing arbor	8. Auto lubrication system
4. Levelling screw with blocks	9. Diamond dresser
5. Grinding Wheel	10. Crossfed Ballscrew