PRODUCTS PROFILE

> NC, CNC Series

CNC84( 400x900mm )

機能規格:

CONTROL PANEL

 

 

 

 

 

 

 

GRINDING PROCEDURES

 

 

   MORE....

 

 

 

 

 

SPECIFICATIONS

MODEL

64CNC

Table Size

400x900

Max. Grinding Length

Longitudinal

800

Max. Grinding Width

Crosswise

400

Max. Distance from Table Surface to Spindle Centerline

720

Standar Magnetic Chuck Size

400x800

T-Slot x pcs

12x3

Longitudinal Movement of x Axis table

Max.Trave, Hydraulic

1000

Table Feeding Speed

10~25000 mm/min

Min. Feed Rate

0.001

Cross Transverse Travel of Z Axis Column

Max.Trave, Hydraulic

460

Table Feeding Speed

0~4000mm/min

Min. Feed Rate

0.001

Vertical In-Feed of Y Axis Wheel

Max. In-Feed Trave

600

Table Feeding Speed

0~4000mm/min

Min. Feed Rate

0.001

Gringding Wheel

Size

405x50x127

Spindle Speed

1750/1450

Motor

Grinding Spindle Drive

15HP(11KW)

X Axis Motor

1.5KW

Y Axis Motor

2KW

Z Axis Motor

2KW

Net Weight, Approx

6000Kg

Gross Weight Approx

6500Kg

NOTE
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc., to improve the performances of the machine without notice. All the specifications shown above are just for reference.

 

 

GENERAL FEATURES

1.STRUCTURE: 

Remote manual pulse generator for vertical & crossfeed 

C3 class vertical & crossfeed ballscrew 

Spindle frequency inverter

Verical & crossfeed servo motor control system, man-manchine interface w/10.4" color tft display, plc w/nc mode control

Longitudinal movement servo hydraulic control system 

Unique longitudinal hydraulic circuitry system is available for slow movement from either direction ( suitable for big downfeed at slow table movement )

 

2.CONTROL SYSTEM: 

High industrial class plc control system w/nc program mode

 

3.SOFTWARE SYSTEM: 

Man-machone conversational diagram data input working system

Easy to learn and operate 

Learn it in 4 hours grinding set in 10 minutes for new workpiece

 

4.STANDARD FUNCTION: 

Surface grinding (cross step feed constant feed, and 3 steps downed) 

Plunge grinding (2 steps downed) 

Groove bottom surface grinding (cross step feed & constant feed, 2 steps downed) 

Multi-plunge grinding system suitable for un-equidepth, concave, convex, and trapezoidal plunge grinding (only by cbn forming wheel, forming device, or on-table wheel derssing attachment)

 

5.DURING GRINDING: 

The infeed amount is adjustable any time 

The grinding wheel could be forced rise up 

Can be stopped and proceeded for workpiece checking 

Can be forced for wheel dressing or dressing setting change

 

6.OPTIONAL ACCESSORIES:

Overhead wheel auto dressing & auto compensation system 

On-table wheel auto dressing & auto compensation system 

The fourth axis scale plate and special clamper for workpiece