ESG_1020TD_b.jpg)
SPECIFICATIONS:
MODEL |
ESG-1020TD |
|
Table Size |
254x508mm |
|
Max.grinding
length |
Longitudinal |
520mm |
Max.grinding width |
Crosswise |
280mm |
Max. distance
from table surface to spindle centerline |
Standard column:500mm /Optional high column:600mm |
|
Stadard magnetic chuck size |
250x500 |
|
Longitudinal
movement of table |
Max. travel, hydraulic |
580mm |
Max. travel, manual |
620mm |
|
Max. travel,infinitely
variable |
60HZ,5-25m/min,50HZ,5-20m/min |
|
Cross
transverse travel |
Auto
transverse increment |
1~13mm |
Auto. Constant
Feeding Speed |
20~320mm/min |
|
Max. auto
transverse travel |
270mm |
|
Max. manual
transverse travel |
300mm |
|
MPG per
Revolution |
5mm |
|
MPG per
Graduation |
0.02mm |
|
Sheelhead vertical infeed |
Automatic infeed |
0.001~0.05mm |
Step feed
(jog) |
0.001mm |
|
Rapid travel,
Approx |
150mm/min |
|
Slow travel,
Approx |
6mm/min |
|
Grinding spidle drive |
Speed |
60HZ,3450 R.P.M. / 50HZ,2850 R.P.M. |
Power rating |
3.0HP |
|
Standard
grinding wheel |
Diameter |
205mm |
Width |
19mm |
|
Bore |
19mm MAX.25mm |
|
Hydraulic
motor |
Power rating |
2.0HPx6P |
Crossfeed motor |
Power rating |
750W |
Elevating
motor |
Power rating |
1/4HPx6P |
Floor space |
Total space
required |
2400x1450x1750mm |
Weights |
Net weight,
Approx. |
1810KGS |
Gross weight,
Approx. |
2160KGS |
|
Rated power,
Approx (Standard power rating) |
7HP |
|
Packing
dimensions |
2480x2060x2100mm |
1890x1430x1930mm |
NOTE:
The manufacturer reserves the right to modify the design, specifications,
mechanisms, etc., to improve the performances of the machine without notice.
All the specifications shown above are just for reference.
An inretface
for humanistic Technology:
1.COLUMN:
Enlarge
honeycomb ribbed culunm especially suitable forheavy duty grinding.
2.CROSS FEED:
Cross
feed ball screw and drive by brushless DC motor,there are have two speed rates-rough grinding speed
and finish grinding speed,provide high efficiency.
3.HIGH ANTI-WEAR GUIDE-WAYS:
The
saddle rests on precision hand scraped double V ways,and the table rests on precision hand scraped V and
flat ways which coated with “TURCITE-B” These guide ways are equipped with auto
lubrication to resist wear of guide ways,and provide
stable movement and durable accuracy.
4.OPERATION PANEL:
Crossfeed movement by AC servo motor drive, crossfeed
feed rate can be controlled, respectively by rough grinding or finish grinding,
greatly enhance the maximum processing efficiency, Z-axis coordinate of the
minimum display value 0.001mm, can be setting the crossfeed
travel on control panel.
|
|
|
|
||||||||
|
|
|
|
||||||||
|
|
|
|
||||||||
|
|
|
|
OPTIONAL
ACCESSORES:
|
|
|
|
|
||||||||||
|
|
|
|
|
||||||||||
|
|
|
|
|
STANDARE ACCESSORIES:
1. Wheel Extrace Screw & Nut |
6. Tool Box With
Tools |
2. Balancing |
7. Auto Lubrication
System |
3. Levelling Screw With Blocks |
8. Diamond Dresser |
4. Wheel Flange |
9. Touch-up Paint |
5. Grinding Wheel |
10. Crossfed Ballscrew |